1. Polyurethane elastomers comprising allophanate modified isocyanates

2. Coagent for thermoplastics and thermoset elastomers

3. Elastomer products with acoustic attenuation properties

4. Adhesive article with a polystyrene/styrene elastomer film

5. Ethylene elastomer compounds having good processability and aging properties

6. Brittleness Temperature of Plastics and Elastomers by Impact ASTM D746 ISO 974

7. Styrene-Ethylene-Butylene-Styrene Thermoplastic Elastomer (SEBS) Properties and Applications

8. Thermoplastic elastomers via reversible addition-fragmentation chain transfer polymerization of triglycerides

9. Treatment of rubbers, additives, polymers, plastics, elastomers, chemicals and composite materials

10. Type I glass vial Butyl elastomer closure and aluminium cap

11. The reproduced Pt origami structures were further stabilized with thin elastomer, and the Pt-elastomer origamis were reconfigurable and served as the multifunctional Backbones for building origami robots

12. Typical Cushioning materials are foams, in various densities and thicknesses, and solid elastomers

13. Composition for polyurethane elastomer having high hardness and excellent abrasion resistance

14. ‘This subheading includes poly(acrylonitrile) and polyacrylic elastomers (ACM) in primary forms (non-vulcanised).’

15. Since no elastomers are used, Circumferential seals can be used in wide range of temperatures.

16. Visible Implant fluorescent Elastomer tagging of the big-bellied seahorse, Hippocampus Abdominalis.

17. Invert emulsion drilling fluids and muds having negative alkalinity and elastomer compatibility

18. High performance rubber Coagents These high-performance functional additives are used to enhance the processability, cure kinetics, and mechanical and dynamic properties of peroxide-cured elastomer, thermoplastic, and thermoplastic elastomer compounds.

19. Barricade™ Elastomers with Fortrex™ Technology High Temperature, Low Compression Set Barricade™ high-performance elastomers bring next generation technology to market to bridge the gap between traditional TPEs and silicone

20. The new field of polymer additives and elastomers has already proven highly successful.

21. Thermoplastics are all-rounders for a wide range of applications, while elastomers are the specialists.

22. Elastomer compositions having improved abrasion resistance, coefficient of friction and hot green strength

23. For the first time, we can have elastomers that are high elasticity or high dampening.

24. The special elastomer absorbs hard impacts after high jumps as well as hard landings.

25. Thermalplastic elastomer, polybutadience rubber, acrylic rubber and other rubber, acrylic sheet, plastics sheet material

26. Viton™ HVA-2 is used as a Coagent for peroxide systems that can be used in ethylene-based elastomers (EPDM, EPM, EVA, EOM) acrylate-based elastomers (AEM and ACM) and chlorinated/ chlorosulfonated polyethylene (CPE and CSM).

27. Non-thermoplastic elastomers having high molecular weight may be readily compounded into adhesives in the process.

28. Elastomers, o-rings, rings of rubber, gaskets, washers, all these goods for machines and machine tools

29. The balloon style Biaxial failure has had some success when special molded sheets of elastomer are constructed wherein a thick clamping ring is molded into the elastomer membrane to allow a strain transition at the gripping region

30. Exposure to 1,3-Butadiene mainly occurs in the workplace, including the following industries: synthetic elastomer (rubber

31. The thermoplastic elastomer composition, according to the present invention, has improved vibration insulation and heat resistance.

32. Layered thermoplastic-resin-elastomer/rubber product with improved weatherability and pneumatic tire made with the same

33. Key statement: Tire components comprising rubber Compositions based upon crosslinkable elastomer composition, the crosslinkable elastomer Compositions including, per 100 parts by weight of rubber (phr), a highly unsaturated diene elastomer, a reinforcing filler and a methylene acceptor of the form wherein R is selected from H, an alkyl moiety, a cycloalkyl moiety, an aryl moiety, an amine moiety or combinations …

34. Building elements (non-metallic), in particular metal and elastomer suspension systems with adjustable springs for floating floors

35. This finding indicates surprisingly better abrasion resistance of a thin elastomer film than a heavy industrial fabric.

36. Coagent Selection For Peroxide-Cured Elastomers from Sartomer Company Inc It is good for Peroxide-cured rubber compound design: 5

37. Butadiene is the raw material for many elastomers, ABS (acrylonitrile Butadiene styrene polymer), in low quantities for nylon and few others

38. Butadiene is primarily used in the manufacture of synthetic elastomers (rubbers, latexes) and for producing raw materials for nylon

39. Abductin is a natural elastomer found as the major component of the elastic hinge ligament in marine scallops

40. Composite structure comprising a vulcanized elastomer containing carboxylic acid functions, directly associated with a thermoplastic sequence-containing polymer.

41. - Constructed of a high quality silicone elastomer, making it resistant to gastric acidity and sharp pieces of food.

42. A composition is provided for preparing a polyurethane elastomer, which is of high hardness and excellent abrasion resistance.

43. Acrylonitrile / Butadiene (NBR) NBR, Buna-N, and nitrile all represent the same elastomer based on a Butadiene and acrylonitrile copolymer

44. ‘Acidimetry was performed by dissolving a sample of the elastomer prepared in this way in a toluene/orthodichlorobenzene mixture.’

45. Aliphatic diisocyanates (ADI) are specialty intermediate chemicals used primarily to make durable coatings, adhesives, sealants, elastomers, and textiles, among other products

46. Acrylonitrile / Butadiene (NBR) NBR, Buna-N, and nitrile all represent the same elastomer based on a butadiene and Acrylonitrile copolymer

47. 26 In this paper, thermoplastics polyurethane elastomer ( TPU ) modified and toughened polyoxymethylene ( POM ) are investigated with Brabender extrusion melt blending.

48. The unique Biomimetic hierarchical structure also provides this new class of elastomers with exceptionally high energy absorption capability and good electrical conductivity.

49. Saltel-Industries is specialized in the development and manufacture of inflatable and advanced technical products made with elastomer-based composite material.

50. The blow-up property of a nonlinear damped hyperbolic equation, which describes the motion of the neo-Hookean elastomer rod, is proven.

51. Rubber air-spring insulator FAEBI®-HD is made of a combination between high-grade elastomer and metal with an amplified sidewall.

52. The use of Coagent products in the radical vulcanization of elastomers is well established, and the fundamental nature of Coagent materials has been explored

53. Sandwich panels for acoustic insulation: wood fibre Isolnat Acoustic (NAT), DBstop (DB), foam elastomer (NBR), polyester fibre (POL), mineral wool (ROCK), glass wool (VER).

54. It consists of polyButadiene, an elastomer (elastic polymer) built up by chemically linking multiple molecules of Butadiene to form giant molecules, or polymers

55. The specimens were then constructed using polymethylmethacrylate (PMMA) for the adherends and a transparent polyurethane elastomer (Solithane® 113)1 for the adhesive.

56. Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate

57. The elastomer provides the necessary radial support of the optical fiber and with the included voided microspheres, provides sufficient radial compliance under acoustic pressure.

58. 11 The organic combined technology of sprayed polyurea elastomer and spayed polyurethane foam is suitable for site spray of waterproof and thermal insulation roof.

59. Methyl Cyanoacrylates are formulated to bond metal to metal, and metal to other substrates such as: plastics, elastomers, wood, and both porous and non porous surfaces

60. Acetophenone Azine (CAS 729-43-1) was recently discovered as a potent allergen in shin pads and footwear containing the foam elastomer ethyl vinyl acetate

61. The photocrosslinking reaction of SBS elastomers was studied tinder UV-irradiation by means of measuring gel content, and the affecting factors of the photocrosslinking system were analyzed.

62. Converge polyols offer a unique combination of high performance and renewability, and can be used in in all polyurethane applications, including coatings, adhesives, sealants and elastomers (CASE)

63. ex 3920 10 40 | 92 | Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate | 0 % | 1.1.2006- 31.12.2008 |

64. First commercial block Copolymers soon followed First hard-soft block materials in late 1950s Thermoplastic elastomers (TPEs) comprise vast majority of production More recently, adhesives, surfactants, membranes, cosmetics

65. Eradi-Lite® features a unique blend of plasticizers and elastomers which make the material resistant to plasticizer migration and staining or Abrasion, while still remaining highly flexible.

66. These long-chain esters are based on many different acid groups such as Adipates, sebacates and glutarates, and provide excellent permanence for critical elastomer and PVC applications.

67. Abstact:The effects of ethylene glycol, diglycol, 4-butylene-glycol and 6-hexene-glycol as the chain-extender on the properties of polyurethane elastomers based on polyether-polyols were studied.

68. ex 3920 10 40 | 92 | Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate | 0 % | 1.1.2007 - 31.12.2008 |

69. SlowStop® is a steel Bollard system that uses an encapsulated elastomer base to allow the Bollard to tilt when impacted; then return to its normal upright position

70. Also disclosed are methods for preparing elastomers compounded with the aggregate, and methods of improving various properties of elastomeric compositions, such as abrasion resistance, hysteresis, wet skid resistance, and/or wet traction.

71. Our engineered "Synthetic Elastomer" Bushings feature the quality ride of rubber at lower speeds and at higher speeds react when under cornering, accelerating and braking loads, for CHASSIS CONTROL and improved handling

72. As well as the above three components a saddle normally incorporates an attaching mechanism made from metal such as a fork, or clamp and may also include a spring or elastomer shock-absorbing mechanism

73. As well as the above three components a saddle normally incorporates an attaching mechanism made from metal such as a fork, or clamp and may also include a spring or elastomer shock-absorbing mechanism.

74. The invention relates to elastomer mounts such as are used for example in automotive engineering as engine mounts for damping the vibrations transmitted from the internal combustion engine to the body and for acoustic decoupling.

75. Butadiene is used primarily as a chemical intermediate and as a monomer in the manufacture of polymers such as synthetic rubbers or elastomers, including styrene-Butadiene rubber (SBR), polyButadiene rubber (PBR), polychloroprene (Neoprene) and nitrile rubber (NR).

76. Styrene-ethylene-Butylene-styrene, also known as SEBS, is an important thermoplastic elastomer (TPE) which behaves like rubber without undergoing vulcanization.SEBS is strong and flexible, has excellent heat and UV resistance and is easy to process.

77. The sealing takes place with the aid of a profile section (16, 18), having the form of joint-tape or injection hose, and made of elastomer material whose surface can swell at least partially upon water absorption.

78. Butadiene is a gas chemical and is extracted from one of a key of the cracker co-product olefins, crude C4 and used in the production of elastomers and co-polymer plastics, such as polyButadiene rubber, styrene-Butadiene rubber, nitrile rubber, styrene Butadiene latex.

79. Established in 1980 by chairman and managing director, Jim Milne CBE, Balmoral Group Holdings Ltd is a privately owned company specialising in subsea buoyancy, flotation, insulation, elastomer and renewable energy products, property development, civil/environmental engineering liquid storage and treatment solutions

80. An acoustic energy source that amplifies the stroke of electrically reactive elements having a body with an elastomer filled first cavity, a highly incompressible fluid filling a second cavity, and bores intersecting the second cavity that extend radially outward from second cavity.